Shelly Pro Dual Cover / Shutter PM

Device identification

Name: Shelly Pro Dual Cover/Shutter PM

Model: SPSH-002PE16EU

Device SSID: ShellyPro2Cover-XXXXXX

BLE Model ID: –

Short description

Shelly Pro Dual Cover/Shutter PM is a DIN rail–mountable dual cover controller with power
measurement. Enhanced with Gen2 firmware flexibility and LAN connectivity, it provides professional
integrators with versatile options for end-customer solutions. It can operate standalone in a local
Wi-Fi network or via cloud automation platforms. The device can be accessed, controlled, and monitored
remotely, and includes an embedded Web Interface for configuration, monitoring, and control.

Main features

• DIN rail mountable dual cover/shutter controller
• Two independent cover/shutter channels with power measurement
• LAN connectivity
• Embedded Web Interface
• Remote monitoring and control
• Gen2 firmware for flexible automation

Use cases

• Residential: Automate blinds, shutters, and covers at home
• MDU: Manage covers/shutters in apartments, condos, hotels
• Light commercial: Small offices, retail spaces, restaurants, gas stations
• Government/municipal: Facility automation
• University/college: Campus-wide automation

Simplified internal schematics

Shelly Pro Dual Cover PM simplified internal schematics

Device electrical interfaces

Inputs: 4 switch/button inputs (S1, S2, S3, S4)

Power supply: 2 screw terminals (1N, 1L)

Outputs: 4 relay outputs (▲ and ▼ of O1; ▲ and ▼ of O2)

Ethernet port: 1 RJ45 connector

⚠ CAUTION! Plug/unplug LAN cable only when the device is powered off. The LAN connector must not
expose metallic touch points.

Connectivity

Wi-Fi

Ethernet

Bluetooth

Safety function

Overheating protection

Overvoltage protection

Overcurrent protection

Overpower protection

Supported load types

• Bi-directional AC motors with RC snubbers

User interface

Inputs: Three front buttons

• Left → scroll up

• Middle → scroll down

• Right → wake display, enter/select menu, hold for navigation

Outputs: Color LCD

• Top bar: time, Bluetooth, LAN, Wi-Fi STA/AP, Cloud status (icons: enabled = blue/green, disconnected = red, disabled = none)

• Main screen: cover names, position sliders, notifications for events (calibration, obstruction, overvoltage, overcurrent, overpower)

• Network menu: toggle Wi-Fi AP/STA, Ethernet, Bluetooth

• Status menu: complete status info

• Maintenance: Wi-Fi reset, factory reset, reboot

Physical

Size (HxWxD): 96×53×59 mm ±0.02 / 3.78×2.01×2.32 in ±0.02

Weight: 150 g / 5.30 oz

Mounting: DIN rail

Screw terminals torque: 0.4 Nm (3.5 lbf·in, green connectors)

Conductor size: 0.5–2.5 mm² (20–14 AWG, green connectors)

Strip length: 6–7 mm (0.24–0.28 in, green connectors)

Shell material: Plastic

Color: Dark gray

Environmental

Ambient temperature: −20 °C to 40 °C (−5 °F to 105 °F)

Humidity: 30–70% RH

Max altitude: 2000 m (6562 ft)

Electrical

Power supply (AC): 110–240 V~

Power supply (DC): N/A

Power consumption: < 3 W

Neutral required: No

Output ratings

Max switching voltage AC: 240 V~

Max switching voltage DC: N/A

Max switching current AC: 16 A per output

Max switching current DC: N/A

Sensors & Meters

Voltmeter (AC): Yes

Ammeter (AC): Yes

Internal temperature sensor: Yes

Radio

RF band: 2400–2495 MHz

Max RF power: < 20 dBm

Wi-Fi protocol: 802.11 b/g/n

Wi-Fi range: Up to 30 m / 100 ft indoors; 50 m / 160 ft outdoors (depends on conditions)

Bluetooth protocol: 4.2

Bluetooth range: Up to 10 m / 33 ft indoors; 30 m / 100 ft outdoors (depends on conditions)

MCU

CPU: ESP32-D0WDQ6

Flash: 8 MB

Firmware capabilities

Schedules: 20

Webhooks: 20 (up to 5 URLs each)

Scripting: Yes

MQTT: Yes

CoAP: No